Description

Technical Parameters

Kevlar Fiber Packing Lubricant with PTFE

Kevlar packing STYLE 6500 Aramid fiber braided packing is made of Du Pont's continuous filament Kevlar yarn impregnated with PTFE emulsion and processed with lubricant. As the strength and module of Kevlar is as high as the steel-like strength. So this packing compared with other kinds of braided packing. They can resist more serve media and higher pressure. It can be installed separately or as end rings with other kinds of packing to combine different characteristics into seals packing ring set.

Kevlar Fiber Packing Lubricant with PTFE Application:

1.Kevlar packing STYLE 6500 can be used in rotary pump, valves, piston pumps, mixers, reactors, pulp and paper, pharmaceutical, food, sugar, chemical and petrochemical, power stations, steel mills and many area. Also ideal as anti-extrusion rings in combination with softer packing.

2.Kevlar packing STYLE 6500 is suitable for most chemicals, water, steam, oils, solvents, abrasive sand, slurry and other gritty media.

Kevlar Fiber Packing Lubricant with PTFE Advantages:

1.Can be used in abrasive application

2.Little monitoring required

3.High pressure resistance

Kevlar Fiber Packing Lubricant with PTFE Application Data:


Pressure: bar	25	500	250
Speed: m/s	25	2	-
PH Range	2-12
Temp.℃	-50 to +260
Density: (g/cm³)	1.40-1.45
Size	1/4"-2"
	6mm-50mm

Package(Per Spool)：

Regular:3m, 8m, 1kg, 1 pound, 2.5kg, 2.5 pound, 5kg, 5 pound,10kg, 10 pound.

Other packages are available on request

Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.

YP010 aramid fiber packing with insert lubricant
Without impregnation, an extremely durable, highly abrasive resistant packing. It is an idea for slurry service application.

Aramid Fiber Packing Typical Application
> This is a universal packing which can be used for pumps in all types of industry.
> Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc.
> A durable packing able to withstand granular and abrasive applications.

Aramid Fiber Packing Prime Features
> It is wear resistant but may damage the shaft if not used properly.
> A minimum shaft hardness of 60HRC is therefore recommended.
> Superior performance
> Lower frictional factor

kevlar packing inpregnated with PTFE from Tenglong

product-559-340 Kevlar Packing 多-wps图片

Kevlar PTFE Packing
Kevlar PTFE Packing is a braided packing made of Aramid Fiber yarns impregnated with P T FE dispersion and treatde with lubricant. T his packing can bear higherpressure applications than other types of braided packing Due to its steel-like strength, this yarn can be employed separately or as back-up rings with other types of packing.

This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even muchbetter. It affords longer service life under severe conditions which conventional asbestos packing can not provide satisfaction, such as sand sulrry, tinmining, paper slurry, feed water pump of power stations. etc.